Network System Laboratory - Backup diff of SLKinect2/Manual(No. 5)

View the diff current.
View the source.
Go to SLKinect2/Manual.

--- 4: 2011-12-29 (Thu) 20:15:49 iseki
+++ 5: 2011-12-29 (Thu) 23:24:45 iseki
@@ Line 85: / Line 85: @@
 *** Setting of Animation Dialog [#x8e7383d]
 &ref(DIALOG_ANIMATION_E.jpg,80%);
+**** Animation UUID [#r6dc794f]
+- UUID (correctly GUID) of the animation replaced with the animation data from the Kinect is specified.
 *** Setting of Sensor Window Dialog [#rfe5bb5b]
 &ref(DIALOG_SENSOR_E.jpg);
+**** Mirroring [#na527ba8]
+- Mirroring of Kinect Data is performed.
+- An avatar motion is mirrored, too.
+**** Use Camera Image [#d3b90e25]
+- Display camera image on Sensor Window.
+- If it is unchecked, background of Sensor Window is light gray.
 *** Setting of Log Window Dialog [#m11bf759]
 &ref(DIALOG_LOG_E.jpg);
+**** Position [#a01e22b1]
+- Display position data (XYZ) from Kinect.
+**** Rotation Matrix [#i839a39a]
+- Display elements of rotation matrix from Kinect.
+**** Quaternion [#efa9fa10]
+- Display relative Quaternion that is computed from rotation matrix.
+- Viewer reads this data directory from shared memory.
+**** Received Data from Network [#n805e0c7]
+- Display relative Quaternion data from an Animation Relay Server.
 *** Setting of Data Save Dialog [#x7e58104]
 &ref(DIALOG_DATA_E.jpg);
+- Not implemented yet
 *** Setting of Network Dialog [#x9904c0e]
 &ref(DIALOG_NETWORK_E.jpg,70%);
+**** Output of Data [#i3397729]
+- Network and Local: Animation Data is wrote to shared memory and sent to Animation Relay Server.
+- Network only: Animation data is sent only to Animation Relay Server.
+**** Fast Transfer Mode [#k875fd78]
+- Usually, the UDP data for one frame of an avatar is a header(64Byte) + elements number of joint data(8) x double(8Byte) x joints number(11) = 768Byte.
+- If this is checked, a data type will turn into a float(4Byte), and will serve as 416Byte in all. In this size, packet fragmentation is never caused.
+- You can change this, also in during transmission of data.
+**** Received Port [#bbceb756]
+- Port number of UDP which receives data from an Animation Relay Server.
+- Usually, 8200 is used in the default .
+- You cannot change this item during login.
+**** Animation Relay Server [#v1b7ba57]
+- IP address or FQDN of an Animation Relay Server is specified.
+- You cannot change this item during login.
+- Our test server is ''silver-star.nsl.tuis.ac.jp''. You can use this server, but support is nothing.
+**** Port Num. [#jdbefcf8]
+- The UDP port number of an Animation Relay Server.
+- It asks administrator and sets to a server.
+- Usually, 8200 should be used in the default.
+- You cannot change this item during login.
+- Port number of ''silver-star.nsl.tuis.ac.jp'' is 8200.
+**** Group Key [#lf77f9dd]
+- This key is for grouping of user on an Animation Relay Server. A top string (Group Key Prefix) can be specified by the server side.
+- It cannot log in, unless Group Key Prefix is the same as one on server side.
+- About Group Key Prefix, please ask server administrator.
+- It can set up freely except a Group Key Prefix. However, the character must be only an alphanumeric character and must be less than 16 characters on the whole including a Group Key Prefix.
+- You cannot change this item during login.
+- Group Key Prefix of ''silver-star.nsl.tuis.ac.jp'' is ''NSL_''
+**** Use NAPT (NAT) [#obfb4cd2]
+- If your PC is in NAPT(NAT), please check this.
+- If it is checked, SLKinect2 send "Router Global IP" and "Opened Port" to an Animation Relay Server instead of won IP and "Received Port".
+- You cannot change this item during login.
+**** Router Global IP [#w845c0c3]
+- IP address currently assigned in order that a router may access the Internet is specified.
+- It confirms on the setting screen of a router.
+- You cannot change this item during login.
+**** Opened Port [#c1325c86]
+- Router's port number opened to an Animation Relay Server is specified.
+- You set up a router and UDP data must be forwarded from router's Opened Port to Received Port of PC which SLKinect2.
+- You cannot change this item during login.
 #br